Browse Catalogue

  [email protected]  +44 01622 854300
Parts & Manuals App  Product Directory     Shop Local!

Oracover 2m ORACOVER AIR Outdoor Transparent Blue (60cm width)

Oracover 2m ORACOVER AIR Outdoor Transparent Blue (60cm width)


For More Solid Light Aircraft, Park Flyers Etc

SKU: ORA321-059-002
Brand: Oracover
Release Date: May 20, 2009
Spares and Manuals
Key Features
  • Colour-fast - there is no 'bleeding' at the edges when ironing over seams.
  • The covering for light constructions.

    Wherever minimum weight is demanded, wherever weight has to be reduced to its limits, ORACOVER® AIR is the product to be applied.

    Whether indoor flyers, park flyers, blimps or airships are to be built, ORACOVER® AIR will do the covering job.

    In contrast to regular ORACOVER®, ORACOVER® AIR has no adhesive layer.

    The hotmelt adhesive is to be brushed onto the surface.

    ORACOVER® AIR OUTDOOR (approx.23 µm), the best choice for more solid light aircraft, park flyers, etc. ORACOVER® AIR OUTDOOR has not only proved itself as covering film for model airplanes, but becomes more and more popular as base material for model sails.



    ORACOVER® AIR Hotmelt Adhesive ORACOVER AIR Adhesive (100 ml) Unstable wood fibres can become insecure and can rip off due to the weight.

    The consequences would be wrinkling and in the worst case the complete peeling off of the fabric.

    Our tip: For an optimal pre-treatment of your wood surface we recommend to coat the surfaces to be ironed with ORACOVER® AIR Hotmelt Adhesive.

    The ORACOVER® AIR Hotmelt Adhesive penetrates the wood and sticks together the loose wood fibres of the heartwood. With that you reach an excellent three-D adhesion of the ORACOVER® AIR film with the surface.

    With the ORACOVER® AIR Hotmelt Adhesive you do not need a further pre-treatment of the wood anymore.


    Application of the ORACOVER® AIR Hotmelt Adhesive:

    1. Sand your wood completely and remove the swarf (vacuum).

    2. Stir up well the contents of the tin.

    3. Apply the ORACOVER® AIR Hotmelt Adhesive 1 – 2 times thinly and evenly by using a brush.

    4. Let the adhesive dry overnight, however at least 10 hours. (Please do not resand).

    5. Cover your model as always with the thermal shrink fabric covering ORACOVER® AIR.

    Productivity: approx. 1 tin / 1m² Unsuitable for surfaces which are not resistant to organic solvents.

    ORACOVER® AIR SPECIAL THINNER If our adhesives should dry a little bit in open containers, the adhesive can be adjusted again to brushing viscosity with the corresponding thinner.

Film Technical Specifications

Weights & Dimensions
Shipping Weight0.09kg0.20lbs
Product Width600mm23.62in
Product Length2,000mm78.74in
ColourTransparent Blue

For Manuals, Parts Explosions, Spares and other Related Products.

Parts & Manuals App

Search by matching specification

Search for matching products across the site or just by Oracover or just in Materials/Covering
You can also find more similar products in the Oracover brand store in Oracover Air/Outdoor.

Property More Like This Property + Brand Property + Category
Brand  Oracover in ../Covering
Category  ../Covering by Oracover
Oracover Store  ../Outdoor
Material  Polyester by Oracover in ../Covering
Colour  Transparent Blue by Oracover in ../Covering